Why install a dust and noise monitoring system?

Why install a dust and noise monitoring system? This is because of three reasons:

1, to comply with the national call to improve monitoring and supervision level

Local environmental protection agencies have responded to the national policy and taken measures to strengthen dust pollution control by requiring all construction sites to install dust monitoring equipment and share data with the monitoring platforms of construction regulators and environmental protection regulators.

2. Avoiding unnecessary losses from rectification and fines

For construction units that fail to comply with the regulations and fail to meet the dust emission standards, the regulator will require them to take immediate rectification measures.

3. Manage at source and implement effective control of dust pollution

To truly control dust pollution, we must start with monitoring. Only through continuous and effective monitoring can effective control measures be implemented, thus solving the dust problem at the source.

Dust and noise monitoring system can collect real-time PM2.5, PM10 dust, noise, temperature, humidity and wind speed and other environmental data. Through the site's LED display, the system will display these monitoring outputs in real time; the system is connected to the national environmental protection data interface, once the monitoring exceeds the standard, it will automatically issue an alarm.

The dust and noise monitoring system also has a remote capture function that captures photos of violations and displays them superimposed on the exceedance index; in the event of an exceedance, the system supports remote manual or automatic start-up of the sprinkler system for a timely response. All these monitoring data will be transmitted to the central management platform in real time through the wireless mobile communication network for further analysis and processing.